BM-105 100kw industrial biomass pellet fed space heater

Product Code: BM-105

Details

BioMann biomass heaters are totally self-contained systems which are ideal for space heating industrial type environments. They run on biomass pellets and there are 6 models in the range with nominal heat outputs ranging from 43 to 300 kW. Each system has 5 principle parts;

Burner housing and combustion chamber

Automatic pellet burner
Control panel and burner programmer
Pellet screw conveyer
Pellet container tank

To consider each part in more detail;

Burner Housing And Combustion Chamber

Industrial heater consisting of a combustion chamber with piped exchanger designed to achieve performances higher than 92%.
The outer structure is made of galvanised steel furnace-painted with polyester dust. The parts exposed to direct heat are totally insulated by air chambers patented by METMANN or by thick insulating fibres.
At the front there is a large access door to the combustion chamber and the heat exchanger to carry out cleaning and inspection tasks.
The fan is mounted in the housing to ensure air is drawn through the heat exchanger and out of the top discharger louvers

Pellet Automatic Burner
Pellet fuel is automatically and safely fed into the burner by a screw feed system. Its main characteristics are;

Electric coil resistance that ignites the pellet over the combustion tray.
A fan ensures that the flame is horizontal shaped similar to the traditional burners.
All parts exposed to fire are made in high temperature resistant steel.
The flow-dynamics of the burner guarantees a homogeneous mix of fuel-combustion agents with a high combustive result. Because of this, the burner can function with reduced amounts of air.
Power regulation may be all-or-none, double stage, or multi-stage, due to its programmer that allows selecting the operation type.

Control Panel And Burner Programmer

The electric panel manages all the equipment functions, including safety functions as well as operative functions. The main features are;

ON-OFF switch.
Safety thermostat.
Electronic programmer with micro-processor.
Display to show control mode and error codes.
Hot air regulation probe.
Pellet in-feed pipe temperature control.
Combustion chamber pressure control.
Alarm remote signalling outlet.
Inter-phase electric connector's panel/burner/heater/power net.
Capability to take connection of a time programmer to start and stop the equipment.
Safety micro-switch to access the cleaning door.

Pellet Screw Conveyer

The pellet screw conveyer has the following components;

High torque motor reducer.
Electric wire with connector included.
Worm screw
Carbon steel tube.
Flexible tube to connect with burner.

Pellet Container Tank
The pellet container is designed and made to be attached to either side of the heater. All the parts have been made in galvanised steel sheet and kiln-painted with polyester dust. Its standard capacity is 190kg but a larger capacity container can be attached as an alternative, which is why the pellet tank as priced as a separate item.

Model
BM-105

Maximum Nominal Power Kw
100

Maximum Real Power Kw
90

Thermal Performance %
90

Maximum Pellet Consumption Kg/H
20

Pellet Consumption With Ambient Thermostat Kg/H
14

Pellet Tank Capacity Kg
190

Maximum Volume To Heat (@ 0.04 Kw/M3) M3
2,500

Thermal Rise °C
33

Driven Air Flow M3/Hr
7,100

Available Pressure For Driven Air Pa
120

Sound Level (3 Metros) Db (A)
75

Air Fan Motor Power
1.5

Power (Electric Coil/Fan Burner/Wormscrew Motor) W
645

Voltage
400V/3ph/50Hz

Dimension A mm
700

Dimension B mm
1610

Dimension C mm
2272

Dimension D mm
1093

Dimension E mm
603

Dimension F mm
1430

Dimension G mm
1786

Flue outlet mm Ø
150