Preparation Stands for JEOL and Hitachi SEM Stubs

S770 Preparation stand for 28 JEOL 9.5mm Ø stubs. This preparation stand has a base plate which can be placed in either an upper or lower position and is secured with 4 small screws. The upper position accommodates all heights of the 9.5mm Ø JEOL stubs. The lower position is designed to give the taller 9.5mm high cylinder stubs more stability. Reference notch in one corner to define the positions of the stubs. Made from clean room compatible aluminium sheet with a thickness of 1.25mm. Size 130 x 85 x 15mm. S771 accepts 28 x 12.2mm JEOL stubs. S774 Preparation stand for 28 Hitachi 15mm Ø stubs. This stand has a base plate which can be placed in two positions and is held with 4 small screws. The drop-in and lift-out stand is easier to use than preparation or storage stands with the M4 thread. The upper position is for both heights of the 15mm Ø Hitachi stubs. The lower position gives the 10mm high cylinder stubs more stability. Reference notch in one corner to define the positions of the stubs. Made from clean room compatible aluminium sheet with a thickness of 1.25mm. Size 130 x 85 x 15mm. S772 Preparation stand for 8 JEOL or Hitachi 25mm Ø stubs. This stand has a base plate which can be placed in two positions and is held with 4 small screws. The upper position is for all heights of the 25mm Ø stubs. The lower position gives the taller 25mm Ø high cylinder stubs more stability. Reference notch in one corner to define the positions of the stubs. Made from clean room compatible aluminium sheet with a thickness of 1.25mm. Size 130 x 85 x 15mm.