Excelitas PS300-12 Xenon Lamp Power Supply
Ouput brightness can be adjusted Easy to operate without debugging, small size and easy to install 175w-300w suitability Over Temperature Protection - Thermostat shuts psu down if excessive internal temperature. Air Flow Requirement - >60cfm Maximum Operating Humidity - 95% RH non condensing Shipping Shock & Vibration - ISTA1A, 2A Safety Compliance - UL60601-1, EN60601-1, IEC60601-1, CSA-22.2 No.601-1-M90 CE mark, CB report. (psu requires correct installation) UL file. E193746 Size - 7” X 4.5” X 2.05” (177.8 X 114.2 X 52mm) Interface Controls - Remote Enable / Disable. Auto / Manual mode. Interlock Remote output current adjust. Current monitor Interface Signals - LAMP ON and LAMP REPLACE signals Auxiliary Outputs - 5V +/-4% @ 1A, 12V+/-4% @ 2A isolated & independent of lamp operation. Fan Output - 12V +/-4% @ 1A (only present when lamp operating) Efficiency - 70% (at full power) Operating Temperature Range -0 – 45deg.C Storage Temperature - -20 to +85deg.C Mains Earth Leakage Current - <120uA @120Vrms, <240uA @240Vrms Maximum Output Voltage - 22Vdc (compensates automatically for lamp voltage up 22V max) Output Current Range - 4 – 23A (constant current, adjustable by internal pot or remotely) Output Connections - 2 X 0.25” spade tabs Over Current Protection - >25A constant current Maximum Output Power - 320W lamp + 30W auxiliary / fan Output Ripple Current - <2% peak –peak Lamp Boost Voltage - >200Vdc Lamp Ignition Pulse - Bipolar >+/-15KV wrt ground (30KV peak – peak) Input voltage - 90 – 264V rms. universal input AC Power Connector - 3 X 0.25” spade tabs Input Frequency 47 – 63Hz Maximum Input Power - <500W Maximum Input Current - <7A rms. Input Fuse - 8A time lag (T8A 250V HRC 5 X 20mm in line only) Input Power Factor - >0.95 (meets the harmonic requirements of EN61000-3-2 class-D)Visit the Professional Lamps UK Ltd website for more information on Excelitas PS300-12 Xenon Lamp Power Supply